กลับ

.

PLC

NX7

Omron

Motion, Logic, Safety, Vision and HMI in one

ติดต่อเรา

list of contents

CPU Units

The NX-Series Machine Automation Controller is at the heart of the new Sysmac platform.

NX701-[][][][]

เหมาะอย่างยิ่งสำหรับการควบคุมขนาดใหญ่ รวดเร็ว และแม่นยำสูงด้วยแกนสูงสุด 256 แกน

NX701 CPU Units

Product Name

Specifications

Current
(Power)
consumption

Model

Program
capacity

Memory capacity
for variables

Number of
motion axes

NX701 CPU Units
[OPC UA Support]

80 MB

4 MB:
Retained during power
interruption
256 MB:
Not retained during power
interruption

256

40 W
(including SD
Memory Card
and End Cover)

NX701-1700

128

NX701-1600

Accessories

The following accessories come with the CPU Unit.

Product Name

Model

NX701-1[]00

NX701-1[]20

Battery

CJ1W-BAT01

End Cover

NX-END01 (must be attached to the right end of the CPU Rack)

End Plate

—

Fan Unit

NX-FAN01

SD Memory Card (Flash Memory)

—

HMC-SD492

Power Supply Units

One Power Supply Unit is required for each Rack.

Product
Name

Power supply
voltage

Output
capacity

Options

Model

Total power
consumption

24-VDC service
power supply

RUN output

Maintenance
forecast monitor

AC Power
Supply Unit

100 to 240 VAC

90 W

No

Yes

No

NX-PA9001

DC Power
Supply Unit

24 VDC

70 W

NX-PD7001

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.

Product
name

Specifications

Model

 

Number of
licenses

Media

Sysmac Studio
Standard
Edition
Ver.1.[][]

The Sysmac Studio is the software that provides an
integrated environment for setting, programming,
debugging and maintenance of machine automation
controllers including NJ/NX-series CPU Units,
NY-series Industrial PC, EtherCAT Slaves, and HMI.

Sysmac Studio runs on the following OS. *1
Windows 7 (32-bit/64-bit version)/Windows 8.1 (32-
bit/64-bit version)/Windows 10 (32-bit/64-bit version)/
Windows 11 (64-bit version)

The Sysmac Studio Standard Edition DVD includes
Support Software to set up EtherNet/IP Units,
DeviceNet slaves, Serial Communications Units, and
Support Software for creating screens on HMIs
(CX-Designer).
For details, refer to your OMRON website.

–
(Media only)

Sysmac
Studio
(32-bit)
DVD

SYSMAC-SE200D

–
(Media only)

Sysmac
Studio
(64-bit)
DVD

SYSMAC-SE200D-64

1 license
*2

–

SYSMAC-SE201L

Sysmac Studio
Team
Development
Option *3

Sysmac Studio Team Development Option is a
licence to enable the project version control function.

1 license
*2

–

SYSMAC-TA401L

*1. Model “SYSMAC-SE200D-64” runs on Windows 10 (64 bit) or higher.
*2. Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
*3. This product is a license only. You need the Sysmac Studio Standard Edition DVD media to install it.
     This option can be used by applying the Team Development Option to Sysmac Studio version 1.20 or higher.
     Project version control function is supported by CPU Unit version 1.16 or later.

Typical Models

Product

Features

Model

Vibration
Suppression Library

The Vibration Suppression Library is used to suppress
residual vibration caused by the operation of machines.

SYSMAC-XR006

Device Operation
Monitor Library

The Device Operation Monitor Library is used to monitor
the operation of devices such as air cylinders, sensors,
motors, and other devices.

SYSMAC-XR008

Dimension
Measurement Library

The Dimension Measurement Library is used to dimension
measurement with ZW-8000/7000/5000 Confocal Fiber
Displacement Sensor, or E9NC-TA0 Contact-Type Smart Sensor.

SYSMAC-XR014

Recommended EtherCAT and EtherNet/IP Communications Cables

Use a straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (aluminum tape and braiding) for EtherCAT.
For EtherNet/IP, required specification for the communications cables varies depending on the baud rate.
For 100BASE-TX/10BASE-T, use a straight or cross STP (shielded twisted-pair) cable of category 5 or higher.
For 1000BASE-T, use a straight or cross STP cable of category 5e or higher with double shielding (aluminum tape and braiding).

Cable with Connectors

Item

Recom-
mended
manufac-
turer

Cable
length
(m)

Model

Wire Gauge and
Number of Pairs:
AWG26, 4-pair Cable
Cable Sheath
material: LSZH *2

Cable with Connectors on Both Ends
(RJ45/RJ45)
Standard RJ45 plug type *1
Cable color: Yellow *3

   

OMRON

0.3

XS6W-6LSZH8SS30CM-Y

0.5

XS6W-6LSZH8SS50CM-Y

1

XS6W-6LSZH8SS100CM-Y

2

XS6W-6LSZH8SS200CM-Y

3

XS6W-6LSZH8SS300CM-Y

5

XS6W-6LSZH8SS500CM-Y

Wire Gauge and
Number of Pairs:
AWG22, 2-pair cable

Cable with Connectors on Both Ends
(RJ45/RJ45)
Rugged RJ45 plug type *1
Cable color: Light blue

OMRON

0.3

XS5W-T421-AMD-K

0.5

XS5W-T421-BMD-K

1

XS5W-T421-CMD-K

2

XS5W-T421-DMD-K

5

XS5W-T421-GMD-K

10

XS5W-T421-JMD-K

Cable with Connectors on Both Ends
(M12 Straight/M12 Straight)
Shield Strengthening Connector cable
*4
M12/Smartclick Connectors
Cable color: Black

OMRON

0.5

XS5W-T421-BM2-SS

1

XS5W-T421-CM2-SS

2

XS5W-T421-DM2-SS

3

XS5W-T421-EM2-SS

5

XS5W-T421-GM2-SS

10

XS5W-T421-JM2-SS

Cable with Connectors on Both Ends
(M12 Straight/RJ45)
Shield Strengthening Connector cable
*4
M12/Smartclick Connectors
Rugged RJ45 plug type
Cable color: Black

OMRON

0.5

XS5W-T421-BMC-SS

1

XS5W-T421-CMC-SS

2

XS5W-T421-DMC-SS

3

XS5W-T421-EMC-SS

5

XS5W-T421-GMC-SS

10

XS5W-T421-JMC-SS

*1. Cables with standard RJ45 plugs are available in the following lengths: 0.2 m, 0.3 m, 0.5 m,
      1 m, 1.5 m, 2 m, 3 m, 5 m, 7.5 m, 10 m, 15 m, 20 m.
      Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m.
      For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019).
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
      Although the LSZH cable is single shielded, its communications and noise characteristics meet the standards.
*3. Cable colors are available in yellow, green, and blue.
*4. For details, contact your OMRON representative.

Cables / Connectors

Item

Recommended
manufacturer

Model

Products for
EtherCAT or
EtherNet/IP
(1000BASE-T*2
/100BASE-TX)

Wire Gauge and
Number of
Pairs: AWG24,
4-pair Cable

Cables

Hitachi Metals, Ltd.

NETSTAR-C5E SAB 0.5 × 4P CP *1

Kuramo Electric Co.

KETH-SB *1

RJ45
Connectors

Panduit Corporation

MPS588-C *1

Products for
EtherCAT or
EtherNet/IP
(100BASE-TX/
10BASE-T)

Wire Gauge and
Number of
Pairs: AWG22,
2-pair Cable

Cables

Kuramo Electric Co.

KETH-PSB-OMR *3

JMACS Japan Co., Ltd.

PNET/B *3

RJ45 Assembly
Connector

OMRON

XS6G-T421-1 *3

*1. We recommend you to use the above Cable and RJ45 Connector together.
*2. The products can be used only with the NX701.
*3. We recommend you to use the above Cable and RJ45 Assembly Connector together.

Optional Products and Maintenance Products

Product name

Specifications

Model

Memory Card

SD memory card, 2GB

HMC-SD292

SDHC memory card, 4GB

HMC-SD492

SDHC memory card, 16GB

HMC-SD1A2 *

* 16 GB memory card can be used for a CPU Unit with unit version 1.21 or later.

Product name

Specifications

Model

Battery Set

 

Battery for
NX701-[][][][]/
NJ501-[][][][]/
NJ301-[][][][]/
NJ101-[][][][]
NJ/NX-Series CPU
Unit maintenance

Note:
1. The battery is included as a standard accessory
with the CPU Unit.
2. The battery service life is 2.5 years at 25°C.
(The service life depends on the ambient operating
temperature and the power conditions.)
3. Use batteries within two years of manufacture.

CJ1W-BAT01

End Cover

Mounted to the
right-hand side of
NX-Series CPU Racks.

One End Cover is provided as a standard accessory
with each CPU Unit and I/O Interface Unit.

NX-END01

DIN Track Accessories

Product name

Specifications

Model

DIN Track

 

Length: 0.5 m; Height: 7.3 mm

PFP-50N

Length: 1 m; Height: 7.3 mm

PFP-100N

Length: 1 m; Height: 16 mm

PFP-100N2

End Plate

There are 2 stoppers provided with CPU Units and I/O Interface Units
as standard accessories to secure the Units on the DIN Track.

PFP-M

NX701-Z[][][]

Ultimate AI edge controller born from the fusion of AI and control

NX-series AI Controller

Product Name

Specifications

Current (Power)
consumption

Model

Program
capacity

Memory capacity for variables

Number of
motion axes

NX701
CPU Units
with AI function

80 MB

4 MB:
Retained during power
interruption
256 MB:
Not retained during
power interruption

256

40 W
(including SD Memory
Card and End Cover)

NX701-Z700

128

NX701-Z600

Sysmac Library for AI Controller

Download Sysmac Library for AI Controller to your PC using AI Operator. Install the library before you use it.

Target Mechanism

Software model

Specification

AI Predictive Maintenance
Library (Cylinder)

SYSMAC-ZPA001000W

CylinderStatus generates mechanism state variables that
reflect the status of the cylinder referenced by the feature
value / machine learning functions.

AI Predictive Maintenance
Library (Ball Screw)

SYSMAC-ZPA002000W

BallScrewStatus generates mechanism state variables that
reflect the status of the ball screw referenced by the feature
value / machine learning functions.

AI Predictive Maintenance
Library (Belt & Pulley)

SYSMAC-ZPA003000W

BeltPulleyStatus generates mechanism state variables that
reflect the status of the belt & pulley referenced by the feature
value / machine learning functions.

Target Mechanism

Number of licenses *

Model

AI Predictive Maintenance Library (Cylinder)

5 licenses

SYSMAC-ZPA001005L

10 licenses

SYSMAC-ZPA001010L

50 licenses

SYSMAC-ZPA001050L

AI Predictive Maintenance Library (Ball Screw)

5 licenses

SYSMAC-ZPA002005L

10 licenses

SYSMAC-ZPA002010L

50 licenses

SYSMAC-ZPA002050L

AI Predictive Maintenance Library (Belt & Pulley)

5 licenses

SYSMAC-ZPA003005L

10 licenses

SYSMAC-ZPA003010L

50 licenses

SYSMAC-ZPA003050L

* One license is required for each mechanism to monitor.

AI Controller Software

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.

Product Name

Number of licenses

Model

AI Controller Standard Software *

— (Media only: DVD)

SYSMAC-AICSTE00D

1 license

SYSMAC-AICSTE01L

10 licenses

SYSMAC-AICSTE10L

30 licenses

SYSMAC-AICSTE30L

50 licenses

SYSMAC-AICSTE50L

* The AI Controller Standard Software and one license are bundled with the NY AI Controller.

Support Software

Software Name

Specification

AI Operator

The AI Operator is a tool to configure AI function settings of the AI Controller as well as to monitor
the status. It works on Windows.
The AI Operator also provides a function for transferring results of calculation performed by the
Feature Value/Machine Learning Function from the AI Controller to a computer.

AI Viewer

The AI Viewer is a tool to visualize feature values and results of equipment events that are output
by the Feature Value/Machine Learning Function. It works on Windows. The AI Operator reads out
data transferred from the AI Controller and displays it on a computer for the users to view.

AI Controller Data Mining Software

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio.
DVDs and licenses are available individually. Each model of licenses does not include any DVD.

Product Name

Number of License

Model

AI Controller Data Mining Software *1

— (Media only: DVD)

SYSMAC-AICSTENGE00D

1 license

SYSMAC-AICSTENGE01L

10 licenses

SYSMAC-AICSTENGE10L

30 licenses

SYSMAC-AICSTENGE30L

50 licenses

SYSMAC-AICSTENGE50L

AI Controller Data Mining Software Model setting edition *2

1 license

SYSMAC-AICMSENGE01L

10 licenses

SYSMAC-AICMSENGE10L

30 licenses

SYSMAC-AICMSENGE30L

50 licenses

SYSMAC-AICMSENGE50L

*1. The AI Controller Data Mining Software Model setting edition is included.
*2. This edition is only available to the AI Easy Modeler for Model setting.

Support Software

Software Name

Specification

AI Easy Modeler

The AI Easy Modeler is a tool designed to generate AI machine learning models necessary for
the AI Controller’s AI function, and used in a data analytic phase. The AI Easy Modeler makes
data analyses easier for users with limited controller programming experiences and statistic
knowledge. It works on Windows.

AI Easy Modeler for
Model setting

The AI Easy Modeler for Model Setting is a tool designed to generate AI machine learning
models necessary for the AI Controller’s AI function, and used in an operational phase. It is
specialized in threshold setting and machine learning model creation. The operation of the tool
is streamlined and easy. It works on Windows.

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.
Before programming the AI Controller with Sysmac Studio, you must register your license number of AI Controller Standard Software.
For registration procedure, see “Displaying and Registering Licenses” in “Sysmac Studio Version1 Operation Manual (Cat. No. W504)”.
Refer to the file below for the NY-series AI Controllers:
D:\OMRON-NY\Installers\AI_Controller_Standard_Software\README.txt

Product name

Specifications

Model

 

Number of
licenses

Media

Sysmac
Studio
Standard
Edition
Ver.1.[][]

The Sysmac Studio is the software that provides
an integrated environment for setting,
programming, debugging and maintenance of
machine automation controllers including NJ/NX-
series CPU Units, NY-series Industrial PC, EtherCAT
Slaves, and HMI.

Sysmac Studio runs on the following OS. *1
Windows 7 (32-bit/64-bit version)/
Windows 8.1 (32-bit/64-bit version)/
Windows 10 (32-bit/64-bit version)/
Windows 11 (64-bit version)

The Sysmac Studio Standard Edition DVD includes
Support Software to set up EtherNet/IP Units,
DeviceNet slaves, Serial Communications Units, and
Support Software for creating screens on HMIs
(CX-Designer).
For details, refer to your OMRON website.

—
(Media
only)

Sysmac
Studio
(32-bit)
DVD

SYSMAC-SE200D

—
(Media
only)

Sysmac
Studio
(64-bit)
DVD

SYSMAC-SE200D-64

1 license
*2

—

SYSMAC-SE201L

Sysmac
Studio Team
Development
Option *3

Sysmac Studio Team Development Option is a licence
to enable the project version control function.

1 license
*2

—

SYSMAC-TA401L

*1. Model “SYSMAC-SE200D-64” runs on Windows 10 (64 bit) or higher.
*2. Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
*3. This product is a license only. You need the Sysmac Studio Standard Edition DVD media to install it.
     This option can be used by applying the Team Development Option to Sysmac Studio version 1.20 or higher.
     Project version control function is supported by CPU Unit version 1.16 or later.

Recommended EtherCAT and EtherNet/IP Communications Cables

Use a straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (aluminum tape and braiding) for EtherCAT.
For EtherNet/IP, required specification for the communications cables varies depending on the baud rate.
For 100BASE-TX/10BASE-T, use a straight or cross STP (shielded twisted-pair) cable of category 5 or higher.
For 1000BASE-T, use a straight or cross STP cable of category 5e or higher with double shielding (aluminum tape and braiding).

Cable with Connectors

Item

Recommended
manufacturer

Cable
length
(m)

Model

Wire Gauge and
Number of Pairs:
AWG26,
4-pair Cable
Cable Sheath
material: LSZH *2

Cable with Connectors on
Both Ends (RJ45/RJ45)
Standard RJ45 plug type *1
Cable color: Yellow *3

  

OMRON

0.3

XS6W-6LSZH8SS30CM-Y

0.5

XS6W-6LSZH8SS50CM-Y

1

XS6W-6LSZH8SS100CM-Y

2

XS6W-6LSZH8SS200CM-Y

3

XS6W-6LSZH8SS300CM-Y

5

XS6W-6LSZH8SS500CM-Y

Wire Gauge and
Number of Pairs:
AWG22,
2-pair cable

Cable with Connectors on
Both Ends (RJ45/RJ45)
Rugged RJ45 plug type *1
Cable color: Light blue

OMRON

0.3

XS5W-T421-AMD-K

0.5

XS5W-T421-BMD-K

1

XS5W-T421-CMD-K

2

XS5W-T421-DMD-K

5

XS5W-T421-GMD-K

10

XS5W-T421-JMD-K

Cable with Connectors on
Both Ends (M12 Straight/
M12 Straight)
Shield Strengthening
Connector cable *4
M12/Smartclick Connectors
Cable color: Black

OMRON

0.5

XS5W-T421-BM2-SS

1

XS5W-T421-CM2-SS

2

XS5W-T421-DM2-SS

3

XS5W-T421-EM2-SS

5

XS5W-T421-GM2-SS

10

XS5W-T421-JM2-SS

Cable with Connectors on
Both Ends (M12 Straight/
RJ45)
Shield Strengthening
Connector cable *4
M12/Smartclick Connectors
Rugged RJ45 plug type
Cable color: Black

OMRON

0.5

XS5W-T421-BMC-SS

1

XS5W-T421-CMC-SS

2

XS5W-T421-DMC-SS

3

XS5W-T421-EMC-SS

5

XS5W-T421-GMC-SS

10

XS5W-T421-JMC-SS

*1. Cables with standard RJ45 plugs are available in the following lengths: 0.2 m, 0.3 m, 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m,
      7.5 m, 10 m, 15 m, 20 m.
      Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m.
      For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019).
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use. Although
      the LSZH cable is single shielded, its communications and noise characteristics meet the standards.
*3. Cable colors are available in yellow, green, and blue.
*4. For details, contact your OMRON representative.

Cables / Connectors

Item

Recommended
manufacturer

Model

Products for EtherCAT
or EtherNet/IP
(1000BASE-T *2/
100BASE-TX)

Wire Gauge and
Number of Pairs:
AWG24,
4-pair Cable

Cables

Hitachi Metals, Ltd.

NETSTAR-C5E SAB
0.5 × 4P CP *1

Kuramo Electric Co.

KETH-SB *1

RJ45 Connectors

Panduit Corporation

MPS588-C *1

Products for EtherCAT
or EtherNet/IP
(100BASE-TX/
10BASE-T)

Wire Gauge and
Number of Pairs: AWG22,
2-pair Cable

Cables

Kuramo Electric Co.

KETH-PSB-OMR *3

JMACS Japan Co., Ltd.

PNET/B *3

RJ45 Assembly
Connector

OMRON

XS6G-T421-1 *3

*1. We recommend you to use the above Cable and RJ45 Connector together.
*2. The products can be used only with the NX701.
*3. We recommend you to use the above Cable and RJ45 Assembly Connector together.

Memory Card

Use

Access point

Specifications

Model

Storage for AI Controller

NX701

SDHC Card, 16 GB

HMC-SD1A2 *1

*1. This is a storage device for NX701-Z[][][]. Do not use it for any other purpose.

NX701-Z[]00 Accessories

The following accessories come with the CPU Unit.

Item

CPU Unit

NX701-Z[]00

Battery

CJ1W-BAT01

End Cover

NX-END01 (must be attached ti the right end of the CPU Rack)

End Plate

—

Fan Unit

NX-FAN01

Memory Card (Flash Memory)

HMC-SD1A2 (16 GB)

NX701-1[]20

The Controller can be directly connected to a database. No special Unit, software, nor middleware is required.

NX701 CPU Units

Product Name

Specifications

Current
(Power)
consumption

Model

Program
capacity

Memory capacity
for variables

Number of
motion axes

NX701 Database
Connection CPU Units
[OPC UA Support]

80 MB

4 MB:
Retained during power
interruption
256 MB:
Not retained during power
interruption
(including Memory
for CJ-series Units)

256

40 W
(including SD
Memory Card
and End Cover)

NX701-1720 *1

128

NX701-1620 *1

*1. NX701-1720-DH, NX701-1620-DH are products equipped with time series data collection system.
　　Consult your Omron sales representative for details.

Accessories

The following accessories come with the CPU Unit.

Product Name

Model

NX701-1[]00

NX701-1[]20

Battery

CJ1W-BAT01

End Cover

NX-END01 (must be attached to the right end of the CPU Rack)

End Plate

—

Fan Unit

NX-FAN01

SD Memory Card (Flash Memory)

—

HMC-SD492

Power Supply Units

One Power Supply Unit is required for each Rack.

Product
Name

Power supply
voltage

Output
capacity

Options

Model

Total power
consumption

24-VDC service
power supply

RUN output

Maintenance
forecast monitor

AC Power
Supply Unit

100 to 240 VAC

90 W

No

Yes

No

NX-PA9001

DC Power
Supply Unit

24 VDC

70 W

NX-PD7001



Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.

Product
name

Specifications

Model

 

Number of
licenses

Media

Sysmac Studio
Standard
Edition
Ver.1.[][]

The Sysmac Studio is the software that provides an
integrated environment for setting, programming,
debugging and maintenance of machine automation
controllers including NJ/NX-series CPU Units,
NY-series Industrial PC, EtherCAT Slaves, and HMI.

Sysmac Studio runs on the following OS. *1
Windows 7 (32-bit/64-bit version)/Windows 8.1 (32-
bit/64-bit version)/Windows 10 (32-bit/64-bit version)/
Windows 11 (64-bit version)

The Sysmac Studio Standard Edition DVD includes
Support Software to set up EtherNet/IP Units,
DeviceNet slaves, Serial Communications Units, and
Support Software for creating screens on HMIs
(CX-Designer).
For details, refer to your OMRON website.

–
(Media only)

Sysmac
Studio
(32-bit)
DVD

SYSMAC-SE200D

–
(Media only)

Sysmac
Studio
(64-bit)
DVD

SYSMAC-SE200D-64

1 license
*2

–

SYSMAC-SE201L

Sysmac Studio
Team
Development
Option *3

Sysmac Studio Team Development Option is a
licence to enable the project version control function.

1 license
*2

–

SYSMAC-TA401L

*1. Model “SYSMAC-SE200D-64” runs on Windows 10 (64 bit) or higher.
*2. Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
*3. This product is a license only. You need the Sysmac Studio Standard Edition DVD media to install it.
     This option can be used by applying the Team Development Option to Sysmac Studio version 1.20 or higher.
     Project version control function is supported by CPU Unit version 1.16 or later.

Typical Models

Product

Features

Model

Vibration
Suppression Library

The Vibration Suppression Library is used to suppress
residual vibration caused by the operation of machines.

SYSMAC-XR006

Device Operation
Monitor Library

The Device Operation Monitor Library is used to monitor
the operation of devices such as air cylinders, sensors,
motors, and other devices.

SYSMAC-XR008

Dimension
Measurement Library

The Dimension Measurement Library is used to dimension
measurement with ZW-8000/7000/5000 Confocal Fiber
Displacement Sensor, or E9NC-TA0 Contact-Type Smart Sensor.

SYSMAC-XR014

Recommended EtherCAT and EtherNet/IP Communications Cables

Use a straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (aluminum tape and braiding) for EtherCAT.
For EtherNet/IP, required specification for the communications cables varies depending on the baud rate.
For 100BASE-TX/10BASE-T, use a straight or cross STP (shielded twisted-pair) cable of category 5 or higher.
For 1000BASE-T, use a straight or cross STP cable of category 5e or higher with double shielding (aluminum tape and braiding).

Cable with Connectors

Item

Recom-
mended
manufac-
turer

Cable
length
(m)

Model

Wire Gauge and
Number of Pairs:
AWG26, 4-pair Cable
Cable Sheath
material: LSZH *2

Cable with Connectors on Both Ends
(RJ45/RJ45)
Standard RJ45 plug type *1
Cable color: Yellow *3

OMRON

0.3

XS6W-6LSZH8SS30CM-Y

0.5

XS6W-6LSZH8SS50CM-Y

1

XS6W-6LSZH8SS100CM-Y

2

XS6W-6LSZH8SS200CM-Y

3

XS6W-6LSZH8SS300CM-Y

5

XS6W-6LSZH8SS500CM-Y

Wire Gauge and
Number of Pairs:
AWG22, 2-pair cable

Cable with Connectors on Both Ends
(RJ45/RJ45)
Rugged RJ45 plug type *1
Cable color: Light blue

OMRON

0.3

XS5W-T421-AMD-K

0.5

XS5W-T421-BMD-K

1

XS5W-T421-CMD-K

2

XS5W-T421-DMD-K

5

XS5W-T421-GMD-K

10

XS5W-T421-JMD-K

Cable with Connectors on Both Ends
(M12 Straight/M12 Straight)
Shield Strengthening Connector cable
*4
M12/Smartclick Connectors
Cable color: Black

OMRON

0.5

XS5W-T421-BM2-SS

1

XS5W-T421-CM2-SS

2

XS5W-T421-DM2-SS

3

XS5W-T421-EM2-SS

5

XS5W-T421-GM2-SS

10

XS5W-T421-JM2-SS

Cable with Connectors on Both Ends
(M12 Straight/RJ45)
Shield Strengthening Connector cable
*4
M12/Smartclick Connectors
Rugged RJ45 plug type
Cable color: Black

OMRON

0.5

XS5W-T421-BMC-SS

1

XS5W-T421-CMC-SS

2

XS5W-T421-DMC-SS

3

XS5W-T421-EMC-SS

5

XS5W-T421-GMC-SS

10

XS5W-T421-JMC-SS

*1. Cables with standard RJ45 plugs are available in the following lengths: 0.2 m, 0.3 m, 0.5 m,
      1 m, 1.5 m, 2 m, 3 m, 5 m, 7.5 m, 10 m, 15 m, 20 m.
      Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m.
      For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019).
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
      Although the LSZH cable is single shielded, its communications and noise characteristics meet the standards.
*3. Cable colors are available in yellow, green, and blue.
*4. For details, contact your OMRON representative.

Cables / Connectors

Item

Recommended
manufacturer

Model

Products for
EtherCAT or
EtherNet/IP
(1000BASE-T*2
/100BASE-TX)

Wire Gauge and
Number of
Pairs: AWG24,
4-pair Cable

Cables

Hitachi Metals, Ltd.

NETSTAR-C5E SAB 0.5 × 4P CP *1

Kuramo Electric Co.

KETH-SB *1

RJ45
Connectors

Panduit Corporation

MPS588-C *1

Products for
EtherCAT or
EtherNet/IP
(100BASE-TX/
10BASE-T)

Wire Gauge and
Number of
Pairs: AWG22,
2-pair Cable

Cables

Kuramo Electric Co.

KETH-PSB-OMR *3

JMACS Japan Co., Ltd.

PNET/B *3

RJ45 Assembly
Connector

OMRON

XS6G-T421-1 *3

*1. We recommend you to use the above Cable and RJ45 Connector together.
*2. The products can be used only with the NX701.
*3. We recommend you to use the above Cable and RJ45 Assembly Connector together.

Optional Products and Maintenance Products

Product name

Specifications

Model

Memory Card

SD memory card, 2GB

HMC-SD292

SDHC memory card, 4GB

HMC-SD492

SDHC memory card, 16GB

HMC-SD1A2 *

* 16 GB memory card can be used for a CPU Unit with unit version 1.21 or later.

Product name

Specifications

Model

Battery Set

Battery for
NX701-[][][][]/
NJ501-[][][][]/
NJ301-[][][][]/
NJ101-[][][][]
NJ/NX-Series CPU
Unit maintenance

Note:
1. The battery is included as a standard accessory
with the CPU Unit.
2. The battery service life is 2.5 years at 25°C.
(The service life depends on the ambient operating
temperature and the power conditions.)
3. Use batteries within two years of manufacture.

CJ1W-BAT01

End Cover

Mounted to the
right-hand side of
NX-Series CPU Racks.

One End Cover is provided as a standard accessory
with each CPU Unit and I/O Interface Unit.

NX-END01

DIN Track Accessories

Product name

Specifications

Model

DIN Track

 

Length: 0.5 m; Height: 7.3 mm

PFP-50N

Length: 1 m; Height: 7.3 mm

PFP-100N

Length: 1 m; Height: 16 mm

PFP-100N2

End Plate

There are 2 stoppers provided with CPU Units and I/O Interface Units
as standard accessories to secure the Units on the DIN Track.

PFP-M

Power Supply Units

Powerful Power Supply Unit to supply steady electric power to NX series controller

NX-PA / PD

Powerful power supply unit to supply stable power to the NX-series controller.

International Standards

• The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA,
    UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK,
    L: Lloyd, CE: EC Directives, C-Tick: C-Tick mark, and KC: KC Registration.
• Contact your OMRON representative for further details and applicable conditions for these standards.

Power Supply Units

Product
Name

Power
supply
voltage

Output
capacity

Options

Model

Standards

Total power
consumption

24-VDC
service
power supply

RUN
output

Maintenance
forecast
monitor

AC Power
Supply Unit

100 to
240 VAC

90 W

No

Yes

No

NX-PA9001

UC1, N, L, CE,
RCM, KC

DC Power
Supply Unit

24 VDC

70 W

NX-PD7001

Accessories

There is no accessory for the NX-series Power Supply Unit.