เลือกรุ่นของ OMRON SERVO

Omron Servo motors และ Servo Drivers มีไว้เพื่อวัตถุประสงค์ในการควบคุมความเร็วสูงและความแม่นยำสูง มีไดรฟ์ที่มีการสื่อสาร EtherCAT ในตัว
โปรดเลือกรุ่นเพื่อดูรายละเอียด
Ratings: 230 VAC from 50 W to 1.5 kW, 400 VAC from 400 W to 15 kW
- ตัวเข้ารหัสความละเอียด 23 บิต
- รวดเร็วและปลอดภัยในการกดแบบไม่ใช้สกรูในตัวเชื่อมต่อทั้งหมด
- ขั้วต่อแบบเสียบได้สำหรับ pre-wiring และการบำรุงรักษาระบบที่ง่ายดาย
- การเดินสายสัญญาณ I/O โดยตรง
- รีเลย์ในตัวสำหรับการควบคุมเบรกมอเตอร์โดยตรง
- ปรับปรุงการควบคุมการวนซ้ำสำหรับการโอเวอร์ชูตและการตั้งเวลาอย่างรวดเร็ว
- ฟังก์ชันความปลอดภัยในตัว:
- 23-bit resolution encoder
- Network Safe Torque Off: PLd (EN ISO 13849-1), SIL2 (IEC 61508)
- Hardwired Safe Torque Off: PLe (EN ISO 13849-1), SIL3 (IEC 61508)
Accurax G5 ช่วยให้คุณสร้างเครื่องจักรที่เร็วขึ้น แม่นยำ ขนาดเล็กลง และปลอดภัยยิ่งขึ้น คุณจะลดน้ำหนักมอเตอร์ได้เกือบ 25% และประหยัดพื้นที่ตู้ได้ 50% คุณจะได้รับความแม่นยำในระดับต่ำกว่าไมครอนและ settling time เป็นมิลลิวินาที
- EtherCAT, MECHATROLINK-II and Analog/Pulse drive models
- Frequency response of 2kHz
- Safety conforming to ISO13849-1 (PL d)
- High accuracy provided by 20 bit encoder
- Drive Programming: embedded indexer functionality in the Analogue/Pulse models
- Advanced vibration suppression
- Full closed loop encoder built-in
- Double registration input provides application versatility
- Rotary motors from 50 W up to 15 kW
- Ironless and iron-core linear motor types
G-series servo drive ที่มี MECHATROLINK-II ในตัวช่วยลดเวลาการเดินสายไฟและการตั้งค่าได้อย่างมาก ในขณะที่ประหยัดพื้นที่ตู้ได้ถึง 30% คุณจึงไม่เพียงแต่ประหยัดพื้นที่ การเดินสายไฟ และเวลาในการติดตั้ง แต่ยังลดโอกาสเกิดข้อผิดพลาดในการเชื่อมต่อได้อย่างมาก
- MECHATROLINK-II and Analogue/Pulse servo drives models
- High-response frequency of 1 kHz
- Auto-tuning for easy and quick start-up
- Vibration suppression
- Positioning, speed or torque control
- Separate power and control power supply
- Fast and accurate positioning
- Incremental and absolute encoder
SmartStep ใหม่นำเสนอโซลูชันที่สมบูรณ์แบบสำหรับแอปพลิเคชันการเคลื่อนไหวแบบจุดต่อจุด ซึ่งความเรียบง่ายเป็นสิ่งสำคัญ SmartStep 2 ช่วยให้ทุกอย่างง่ายขึ้นในขณะที่รวมประสิทธิภาพสูงและคุณสมบัติขั้นสูงไว้ในโซลูชันที่คุ้มค่า
- Ultra-compact size. The footprint is only 48% compared to the previous SmartStep
- Vibration suppression
- Adaptive resonance suppression filter
- Feedback pulse output
- On-line Auto-tuning and Easy set up
- Electronic gear, four internal speed settings and wide range of pulse settings
- Two torque limits
- Position control via pulse input 500 kpps
- Configuration and commissioning using CX-Drive software
Ratings: 230 VAC from 50 W to 1.5 kW, 400 VAC from 400 W to 15 kW
- 23-bit resolution encoder
- Compact and small motor size
- Multi-turn encoder design without mechanics: 16-bit, 65536 turns
- Battery-free absolute multi-turn encoder or incremental encoder
- Pre-assembled motor cables
- Designed for easy EMC compliance
Accurax G5 servo motors มีการป้องกัน IP67 และขั้วต่อบนตัวมอเตอร์ การใช้มอเตอร์แบบ 10 ขั้วและตัวเข้ารหัส 20 บิตทำให้ cogging motor ลดลง 40% servo motor มีน้ำหนักเบาลง 25% และเล็กลง 15% เนื่องจาก PAC-Clamp ที่ออกแบบสเตเตอร์ใหม่ที่จดสิทธิบัตรแล้ว ลด iron loss 40% และตัวเข้ารหัสที่เล็กลง 15%
- Sizes from 50W to 15 kW, rated speeds of 1000 rpm, 1500 rpm, 2000 rpm and 3000 rpm
- Peak torque 300% of continuous torque during 3 seconds or more depending on model
- High accuracy provided by a 20 bit resolution encoder, ABS encoder as an option
- IP67 protection in all motor models
- Low speed ripple and low torque ripple due to low torque cogging
- Compact design and robust construction including smart connectors
- No motor settings required, just plug and run
servo motor ขนาดกะทัดรัดที่หลากหลายเพื่อตอบสนองทุกความต้องการในการใช้งาน เมื่อใช้กับไดรฟ์ SmartStep 2 G -series servo motors จะมอบความเรียบง่ายและความคุ้มค่าของสเต็ปเปอร์พร้อมข้อดีเพิ่มเติมของระบบเซอร์โว
- Peak torque 300% of continuous torque during 3 seconds or more depending on model
- Servo motors supported by SmartStep2, G-Series and Accurax G5 servo drives
- Cylindrical and Flat servo motors types are available
- Encoder accuracy of 10,000 pulses incremental as standard and 17-bit absolute
- IP65 as standard and shaft oil seal available
- Motors with brake as option